diff --git a/CMakeLists.txt b/CMakeLists.txt
index c0d2460..e28661f 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -6,7 +6,7 @@ cmake_minimum_required(VERSION 3.14.0)
 project(handdleai VERSION 0.1.0)
 string(TIMESTAMP RUN_TIME)
 message( " project start : " ${RUN_TIME})
-
+add_compile_definitions(NOMINMAX)
 
 set(CMAKE_DISABLE_IN_SOURCE_BUILD ON)
 set(CMAKE_DISABLE_SOURCE_CHANGES  ON)
diff --git a/include/global.h b/include/global.h
index 0331dd3..52e2893 100644
--- a/include/global.h
+++ b/include/global.h
@@ -100,18 +100,6 @@ static cv::Mat qImageToCvMat(const QImage& inImage)
     }
     return cv::Mat();
 }
-template<typename T>
-T getMax(const T& a, const T& b) {
-    return (a > b) ? a : b;
-}
-template<typename T>
-T getMin(const T& a, const T& b) {
-    return (a < b) ? a : b;
-}
-template<typename T>
-T getAbs(const T& value) {
-    return (value < 0) ? -value : value;
-}
 static void cvMatToQPixMap(cv::Mat& src,QPixmap& pixmap)
 {
     pixmap = QPixmap::fromImage(cvMatToQImage(src));
diff --git a/include/simpleAlgo.h b/include/simpleAlgo.h
index 2e15925..cdda621 100644
--- a/include/simpleAlgo.h
+++ b/include/simpleAlgo.h
@@ -88,16 +88,16 @@ static cv::Mat cutImg2Cls(cv::Rect boundingBox, cv::Mat imgInput, cv::Size targe
 
     // 以目标框中心为正方形中心，边长为 max(max(w,h),128)
     const cv::Point mid(boundingBox.x + boundingBox.width / 2, boundingBox.y + boundingBox.height / 2);
-    const int sideLength = getMax(getMax(boundingBox.width, boundingBox.height), 128);
+    const int sideLength = std::max(std::max(boundingBox.width, boundingBox.height), 128);
 
     // 期望在原图上的 ROI（可能越界）
     cv::Rect expectRect(mid.x - sideLength / 2, mid.y - sideLength / 2, sideLength, sideLength);
 
     // 计算需要的边界填充（反射填充）
-    const int left   = getMax(0, -expectRect.x);
-    const int top    = getMax(0, -expectRect.y);
-    const int right  = getMax(0, expectRect.x + expectRect.width  - imgInput.cols);
-    const int bottom = getMax(0, expectRect.y + expectRect.height - imgInput.rows);
+    const int left   = std::max(0, -expectRect.x);
+    const int top    = std::max(0, -expectRect.y);
+    const int right  = std::max(0, expectRect.x + expectRect.width  - imgInput.cols);
+    const int bottom = std::max(0, expectRect.y + expectRect.height - imgInput.rows);
 
     cv::Mat padded;
     if (left || top || right || bottom) {
@@ -126,7 +126,7 @@ static std::vector<cv::Mat> cutImg2ClsVec(cv::Rect boundingBox, cv::Mat imgInput
 
     const int w = boundingBox.width;
     const int h = boundingBox.height;
-    const int minSide = getMin(w, h);
+    const int minSide = std::min(w, h);
     if (minSide <= 0) {
         std::cerr << "Bounding box has zero width or height." << std::endl;
         return result;
@@ -622,7 +622,7 @@ static cv::Rect doMatchTemplate(const cv::Mat& templateImg, const cv::Mat& srcIm
 static bool isContoursOverlap(const std::vector<cv::Point>& contour1, const std::vector<cv::Point>& contour2, double thresholdPercent = 0) {
     cv::Rect rect1 = cv::boundingRect(contour1);
     cv::Rect rect2 = cv::boundingRect(contour2);
-    cv::Size tempImgSize(getMax(rect1.x + rect1.width, rect2.x + rect2.width), getMax(rect1.y + rect1.height, rect2.y + rect2.height));
+    cv::Size tempImgSize(std::max(rect1.x + rect1.width, rect2.x + rect2.width), std::max(rect1.y + rect1.height, rect2.y + rect2.height));
     cv::Mat binaryImage = cv::Mat::zeros(tempImgSize, CV_8U);
 
     // 画出目标轮廓
@@ -651,7 +651,7 @@ static bool isRectOverlap(const cv::Rect& rect1, const cv::Rect& rect2, double t
     cv::Rect intersection = rect1 & rect2;
     if (thresholdPercent != 0)//如果有阈值
     {
-        int maxCnotourArea = getMax(rect1.area(), rect2.area());
+        int maxCnotourArea = std::max(rect1.area(), rect2.area());
         if (intersection.area() / maxCnotourArea < thresholdPercent)
             return false;
     }
@@ -740,7 +740,7 @@ static cv::Mat tiledImages(std::vector<cv::Mat>& imgs)
     int matWidth = 0, matHeight = 0;
     for (auto& mat : imgs)
     {
-        matHeight = getMax(mat.rows, matHeight);
+        matHeight = std::max(mat.rows, matHeight);
         matWidth += mat.cols;
     }
     cv::Mat showMat(matHeight, matWidth, CV_8UC3);
@@ -806,7 +806,7 @@ static void denoiseImage(const cv::Mat& inputMat, cv::Mat& outputMat, int kernel
     }
 
     // 兜底：使用可分离高斯滤波，适合较大核或需要指定平滑强度的场景
-    const double sigmaChecked = getMax(0.0, sigma);
+    const double sigmaChecked = std::max(0.0, sigma);
     cv::GaussianBlur(inputMat, outputMat, cv::Size(k, k), sigmaChecked, sigmaChecked, cv::BORDER_DEFAULT);
 }
 
diff --git a/include/simpleTools/writeExcel.cpp b/include/simpleTools/writeExcel.cpp
index 045e6aa..db013e8 100644
--- a/include/simpleTools/writeExcel.cpp
+++ b/include/simpleTools/writeExcel.cpp
@@ -12,9 +12,9 @@
 //        std::vector < std::pair<std::string, std::string>>
 //            sonMerges = writeExcelLoop(sheet, input.nexCols[i], depth + 1, cols + depthCount);
 //        mergeStr.insert(mergeStr.end(), sonMerges.begin(), sonMerges.end());
-//        depthCount += getMax((int)input.nexCols[i].nexCols.size(), 1);
+//        depthCount += std::max((int)input.nexCols[i].nexCols.size(), 1);
 //    }
-//    std::string endUnit = char(65 + depth) + std::to_string(cols + getMax(depthCount - 1, 0));
+//    std::string endUnit = char(65 + depth) + std::to_string(cols + std::max(depthCount - 1, 0));
 //    sheet.cell(startUnit).value() = input.text;
 //    mergeStr.push_back(std::make_pair(startUnit, endUnit));
 //    return mergeStr;
diff --git a/src/core/service/detCallbackChain.hpp b/src/core/service/detCallbackChain.hpp
index a9ccdcb..0c3f553 100644
--- a/src/core/service/detCallbackChain.hpp
+++ b/src/core/service/detCallbackChain.hpp
@@ -46,7 +46,7 @@ public:
 		if (data->resultImgs.size() > 0) {
 			
 			for (int i = 0; i < data->resultImgs.size() && i < data->resultImgShowSet.size(); i++) {
-				auto pack = data->resultImgShowSet[getMin(i, (int)data->resultImgShowSet.size() - 1)];
+				auto pack = data->resultImgShowSet[std::min(i, (int)data->resultImgShowSet.size() - 1)];
 				int resizeRate = qMax(data->resultImgs[i].cols / uiShowImgCompressThreshold, data->resultImgs[i].rows / uiShowImgCompressThreshold) ;
 				resizeRate = std::pow(2, resizeRate);
 				if (resizeRate > 1) {
diff --git a/src/launcher/GUI/mainwindow.h b/src/launcher/GUI/mainwindow.h
index 7befdad..432ff44 100644
--- a/src/launcher/GUI/mainwindow.h
+++ b/src/launcher/GUI/mainwindow.h
@@ -459,7 +459,7 @@ protected:
     void mouseMoveEvent(QMouseEvent* event) override {
         if (event->buttons() == Qt::LeftButton && isMoving) {
             QPoint pos = event->globalPos();
-            if (getMax(getAbs(pos.x()- startPos.x()), getAbs(pos.y() - startPos.y()))>10)
+            if (std::max(std::abs(pos.x()- startPos.x()), std::abs(pos.y() - startPos.y()))>10)
                 if(lastWindowMoveTime.elapsed()> freshDelay)//每秒刷新100次
                 {
                     lastWindowMoveTime.restart();
diff --git a/src/launcher/GUI/uiModule/components/fancyProcessBar.h b/src/launcher/GUI/uiModule/components/fancyProcessBar.h
index 34dfada..05104fe 100644
--- a/src/launcher/GUI/uiModule/components/fancyProcessBar.h
+++ b/src/launcher/GUI/uiModule/components/fancyProcessBar.h
@@ -48,8 +48,8 @@ public:
     }
     void addData(int value)
     {
-        maxValue = getMax(value, maxValue);
-        minValue = getMin(value, minValue);
+        maxValue = std::max(value, maxValue);
+        minValue = std::min(value, minValue);
         currentValue = value;
         if((maxValue - minValue) ==0)
             setProgress(1);
diff --git a/src/launcher/GUI/uiModule/uiModule_dumpToExcel.h b/src/launcher/GUI/uiModule/uiModule_dumpToExcel.h
index 3e9a66c..ecb15c2 100644
--- a/src/launcher/GUI/uiModule/uiModule_dumpToExcel.h
+++ b/src/launcher/GUI/uiModule/uiModule_dumpToExcel.h
@@ -27,7 +27,7 @@ public:
 	{
 		int time1 = startTimeEdit->time().hour() * 60 + startTimeEdit->time().minute();
 		int time2 = endTimeEdit->time().hour() * 60 + startTimeEdit->time().minute();
-		return { getMax(time1,time2),getMax(time1,time2) };
+		return { std::max(time1,time2),std::max(time1,time2) };
 	}
 
 	QTime getStartTime() const {
diff --git a/src/launcher/GUI/uiModule/uiModule_imageView.h b/src/launcher/GUI/uiModule/uiModule_imageView.h
index 7f11d38..632c358 100644
--- a/src/launcher/GUI/uiModule/uiModule_imageView.h
+++ b/src/launcher/GUI/uiModule/uiModule_imageView.h
@@ -211,7 +211,7 @@ protected:
         //    deleteAllRect();
 
         //    if (width != 0 && height != 0) {
-        //        double scaleRate = getMax(width == 0 ? 1.0 : rect().width() / width,height == 0 ? 1.0 : rect().height() / height);
+        //        double scaleRate = std::max(width == 0 ? 1.0 : rect().width() / width,height == 0 ? 1.0 : rect().height() / height);
         //        scale(scaleRate, scaleRate);
         //        centerOn(startPos + QPointF(width / 2, height / 2));
         //    }
diff --git a/src/mission/581-Dgh-DB-2/581-Dgh-DB-2.h b/src/mission/581-Dgh-DB-2/581-Dgh-DB-2.h
index 94fa59e..3e3567a 100644
--- a/src/mission/581-Dgh-DB-2/581-Dgh-DB-2.h
+++ b/src/mission/581-Dgh-DB-2/581-Dgh-DB-2.h
@@ -121,7 +121,7 @@ cv::Mat LocalCutImg_DET(handdleAI::pDetection* pDet, cv::Mat src, float zoom, in
 static std::vector<cv::Mat>dingGaiHanClsCut(cv::Rect boundingBox, cv::Mat imgInput, cv::Size targetSize = cv::Size(128, 128))
 {
     std::vector<cv::Mat> result;
-    int splitCount = getMax(boundingBox.width, boundingBox.height) / getMax(boundingBox.width, boundingBox.height);
+    int splitCount = std::max(boundingBox.width, boundingBox.height) / std::max(boundingBox.width, boundingBox.height);
     //std::cout << "splitCount" << splitCount;
     if (splitCount > 2) {//大于2分段裁
         if (boundingBox.width > boundingBox.height) {//宽大于高，横着裁
diff --git a/tools/.clang-format b/tools/.clang-format
new file mode 100644
index 0000000..3d10ea8
--- /dev/null
+++ b/tools/.clang-format
@@ -0,0 +1,7 @@
+Language: Cpp
+BasedOnStyle: Google
+UseTab: Never # 使用空格而不是制表符。
+IndentWidth: 4 # 缩进宽度为4个空格。
+TabWidth: 4 # Tab长度
+ColumnLimit: 0
+SortIncludes: false
\ No newline at end of file
diff --git a/tools/clang-format.exe b/tools/clang-format.exe
new file mode 100644
index 0000000..7a176ce
Binary files /dev/null and b/tools/clang-format.exe differ
diff --git a/tools/formatter.bat b/tools/formatter.bat
new file mode 100644
index 0000000..de6bd06
--- /dev/null
+++ b/tools/formatter.bat
@@ -0,0 +1,54 @@
+@echo off
+echo Starting code formatting...
+
+:: 定义要格式化的多个文件夹
+set "FOLDER_1=../src"
+set "FOLDER_2=../include"
+set "FOLDER_3=../subModule"
+set "FOLDER_4=../rpcModule"
+
+echo Formatting multiple folders...
+echo.
+
+:: 格式化第一个文件夹
+if exist "%FOLDER_1%" (
+    echo Processing folder: %FOLDER_1%
+    for /r "%FOLDER_1%" %%i in (*.cpp *.h) do (
+        echo Formatting: %%i
+        clang-format -i "%%i"
+    )
+    echo.
+)
+
+:: 格式化第二个文件夹
+if exist "%FOLDER_2%" (
+    echo Processing folder: %FOLDER_2%
+    for /r "%FOLDER_2%" %%i in (*.cpp *.h) do (
+        echo Formatting: %%i
+        clang-format -i "%%i"
+    )
+    echo.
+)
+
+:: 格式化第三个文件夹
+if exist "%FOLDER_3%" (
+    echo Processing folder: %FOLDER_3%
+    for /r "%FOLDER_3%" %%i in (*.cpp *.h) do (
+        echo Formatting: %%i
+        clang-format -i "%%i"
+    )
+    echo.
+)
+
+:: 格式化第4个文件夹
+if exist "%FOLDER_4%" (
+    echo Processing folder: %FOLDER_4%
+    for /r "%FOLDER_4%" %%i in (*.cpp *.h) do (
+        echo Formatting: %%i
+        clang-format -i "%%i"
+    )
+    echo.
+)
+
+echo Formatting completed!
+pause
\ No newline at end of file
diff --git a/tools/fuck-u-code-windows-amd64.exe b/tools/fuck-u-code-windows-amd64.exe
new file mode 100644
index 0000000..c9da3c8
Binary files /dev/null and b/tools/fuck-u-code-windows-amd64.exe differ