init files

BaseModules/Hd_SocketModule_ModbusTcp/camera_cfg-modbus.json

@@ -0,0 +1,69 @@
+{
+  "taskName": "task1",
+  "save_image": "C:\\930SaveStation3\\",
+  "savePath": "C:\\930TotalResult\\",
+  "tablelist": [
+    {
+      "table_key": "",
+      "cName": "机台名:",
+      "eName": "NG number:",
+      "value": "外观检测"
+    },
+    {
+      "table_key": "",
+      "cName": "班次:",
+      "eName": "Number :",
+      "value": "白班"
+    },
+    {
+      "table_key": "",
+      "cName": "工位名:",
+      "eName": "yield :",
+      "value": "工位三"
+    }
+  ],
+  "showlist": [
+    {
+      "show_key": "2D-J93413657-J93413638-K39998967-00K19936732",
+      "cName": "2D",
+      "eName": "view1"
+    },
+    {
+      "show_key": "3D-133872-132192-123490-124229",
+      "cName": "3D",
+      "eName": "view2"
+    }
+  ],
+  "Communicationlist": [
+    {
+      "stations": [
+        "station3"
+      ],
+      "Communication_key": "Communication",
+      "Communication_type": "PLC",
+      "writetype": "ushort",
+      "Communication_sleeptime": "30",
+      "Communication_init": "init_127.0.0.1_502_1", //init初始化指令，"127.0.0.1"IP，"502"端口，"1"从站ID
+      "Communication_readAllCmd": "read_byte_1400_100", //read读指令，"byte"字节寄存器,"1400"寄存器位置，Modbus的地址没有前缀D或M，"100"，连续读100个，如果是"1"，则只读1个
+      "heartCmd": "write_short_1003_1", //write写指令，"short"16位寄存器，"M1003"寄存器位置,"1"数值，如果是"1,2,3,4,5"则变为连续写5个16位寄存器
+      "heartTime": "250",
+      "moduleName": "Hd_SocketModule_ModbusTcp" //数据类型可选[byte,short,ushort,float,double,string]
+    }
+  ],
+  "stationlist": [
+    {
+      "station_key": "offlineStation1",
+      "task_thread_num": "0",
+      "plcread_area": {
+        "Communication_readAllCmd": "read_byte_1300_100"
+      },
+      "plcwrite_area": {
+        "snOkCmd": "write_short_1300_9",
+        "snErrorCmd": "write_short_1300_1",
+        "overOkCmd": "write_short_1310_9",
+        "overErrorCmd": "write_short_1310_1",
+        "dateCmd": "write_string_1340_12"
+      }
+    }
+  ]
+}